OneCNC at EMO 2009 Milan Italy

OneCNC exhibited at the EMO 2009 for the 6 days 5-10 October.

During the six days of the exhibition, the organizers registered 124,660 visitors, representing 99 countries from five continents. The impressive foreign attendance, representing 41% of the total, attests to the international character that has traditionally distinguished EMO MILANO.

The top place in this ranking was taken by Germany, with 12.8% of total international visitors, followed by America, the Czech Republic, Finland, France, Japan, India, Poland, Russia and Switzerland.

Alongside the consolidated attendance by operators from the old continent, there was an extraordinary number of non-European visitors, 40.1% of the total international attendance.

Analysis of international attendance confirms EMO’s importance and the interest that operators all over the world have in the Italian market. Italy is currently fifth in the world rankings of consumption of production systems and second in the European panorama. The first twenty positions include as many as seven non-European countries: India, Russia, Japan, the United States, Brazil, Korea and Taiwan.


The number of attendees at the exhibition, signalled that manufacturing industry globally is again moving in the right direction. Although the exhibition was held in Milan, 60% of the exhibitors were from other countries and 40% from Italy.

Here we see Devis Todesco from OneCNC Italy demonstrating the products at the booth.

The next EMO is scheduled to be held in Hannover Germany 19 - 24 September 2011.

EMO 2011

Blue Dolphin Reduces cycle time

Blue Dolphin Engineering USA
Experiences shorter development cycle! times with OneCNC CAD-CAM software in production.

"We knew we had to shorten our lead times to get our products quickly, after much research we chose OneCNC. OneCNC We found our design cycle is extremely short and is now an indispensable part of our business"

Perfecting Putters with OneCNC


YAR Golf, located in Arizona, proudly engineers, manufactures, and assembles their exclusive putters in Tempe, Arizona USA.  The uniqueness of the YAR GX1 Putter is unparalleled, with a specific design concept that allows players to up the ante in their golfing game. 

YAR Golf has created the only Golf Club / Putter in the golfing industry that has ever been accepted by USGA for their Adaptive Golf Program. This year alone there were 19 other devices submitted and rejected by the USGA’s Executive Board for this distinction. Capable of lifting the golf ball out of the cup without the player needing to bend. Aging baby boomers and the physically impaired is not their only clientele. YAR Golf is the only company that has focused on their specific needs in the game of golf by designing a putter that has features intended to enhance the game of players at all skill levels.

Created by a Materials Science and Engineering PhD. The YAR GX1 Putter has many features that set it apart from the standard putter designs, which have been left unchanged and stagnant for quite some time. Using MOI (Mass Moment of Inertia) and Parallel Axis Linearization combined with Aeronautical Physics, its design and shape have created the largest true Sweet Spot in the Putting industry, this phenomena is not found on standard putters, as the YAR putter’s entire face is considered a ‘sweet spot’. 

In a 2009 study, the YAR putter was put to the test by Golf Test USA.  They summed up that the YAR putter performed beyond its claims and it received the highest ranking among putters worldwide.  From Golf Test USA “…because of its design and balance it was very easy to putt with just one hand.  The overall design of the YAR putter can help any golfer who has physical limitations such as bending over due to back pain.  The YAR putter can easily mark the ball and pick it up at the same time, and pick the ball up out of the hole.  It can also be used to pick other clubs off the ground.  This is the perfect putter for “adaptive” golf.  The YAR GX1 putter was one of only 8 putters, out of 47, awarded a 5 star rating based on overall test results.  The YAR Golf GX1 putter has received our coveted “Seal of Excellence” [for its outstanding results]”

Dr. V, the creator of the YAR putter, contacted OneCNC in 2007 looking for a CAM solution to make her new concept a reality.  Because of the secrecy involved in the YAR putter concept and patent, all prototyping needed to be completed in house.  Knowledge in the CNC Machining industry was minimal for Dr. V, so an easy to use and powerful CAM program was paramount.  After evaluating over 6 different CAM programs a one-on-one online demonstration was scheduled with OneCNC’s technical support.  “OneCNC was superior to the other CAD/CAM systems I appraised.  It was easier, offered more design tooling procedural advantages, was a pleasure to acclimate with, and the technical support representative was the most knowledgeable.  In fact, I purchased an upgrade the day after my initial 1-hour consultation, and I have never regretted that decision”.  
Running XR3 Mill Professional gave Dr. V full control over the designing and machining of the YAR putters. 

When asked about OneCNC’s technical support and customer service she stated, “The OneCNC support and office staffs are awesome, caring, and spectacular.  Kudos and accolades to all at OneCNC.

Yar Golf has donated over $50,000 in GX1 putters to disadvantaged golfers and charities around the world and is the Official Putter of numerous Disabled Organizations; as well as their “Support a Disabled Veteran” project, which supplies free golfing equipment for disabled American Veterans. 

Gerri Jordan President 
Dr. Vanderbilt CEO
Tempe, Arizona 
USA 85284

For more information on the YAR Putters, visit their website or the demo video from YouTube below:

Yargolf website

YouTube link to a Demo