OneCNCXR6 5 Axis Simultaneous Development

OneCNC Development Team have been very active in the development and refinement of the 5 axis simultaneous ability in OneCNC Milling .

One of the key developments has been to optimize the efficiency of the NC code for the machine to enable optimum smoothness of operation of the CNC machine.

This continual development will enable users to get the CNC code needed to turn their machines into real production tools producing high-quality finished parts.

The part manufactured for the test was a customer request for the machining of the top section of a turbine blade they manufacture.

This video was filmed in the OneCNC Research and Development Department during one of the practical machining tests.

This is new functionality recently added to OneCNCXR6 Expert with 5 axis simultaneous module version.

OneCNC designs and develops the tool paths in-house as one cohesive CAD CAM system rather than adding third party modules.

This method of development can often provide users with unique  integral ability and superior ease of use.

For a demonstration of this "5 Axis Simultaneous" machining contact your local OneCNC Sales and Support office.

OneCNC Contact Us >>

OneCNCXR6 in Mould Making Mode

OneCNC continual research and development in tool path technology involves actual real time machining and testing of the developed systems.

OneCNC Research and Development in the course of testing the new "Constant Offset" finish machining functionality released this video of the machining.

This new ability is included in the OneCNCXR6 Mill Expert version.

In this video example the function was used to perform a complete finish tool path in one pass then with an added pencil finish tool path to complete the finishing.

This is just one of many features that are developed and proven in-house before being releasde to users.

OneCNC designs and develops the tool paths in-house as one cohesive CAD CAM system rather than adding third party modules.

This method of development can often provide users with unique  integral ability and superior ease of use.

For a demonstration of this "Constant Offset" machining contact your local OneCNC Sales and Support office.

OneCNC Contact Us >>

OneCNCXR6 Engine Building

This is a OneCNCXR6 video showing how a DMG DMU 50 5 Axis machine created an engine crank case using the Mill Expert Version of the software.. The video shows how the machine is programmed to create this part and we are sure you will agree that the quality of the part is amazing.

This OneCNCXR6 video could also be for other machines OneCNC supports using Heidenhain, Siemens, Fanuc, Okuma, Mori Seiki and others controls.

The video was filmed at a long time customer of OneCNC at their manufacturing facility Currawong Engineering..

This is a typical specialist current production part that the company manufacturers and we thank them for allowing us to film in their facility...

Currawong Engineering Pty Ltd is a UAV systems Aerospace and related parts manufacturer based in Tasmania, Australia,